everlight electronics co., ltd. http:\\www.ev erlight.com rev 1 page: 1 of 10 device no dtt-067-248 prepared date 10-27-2006 prepared by jainetsai technical data sheet top phototransistor pt67-21b/c14/tr8 features ? fast response time ? high photo sensitivity ? small junction capacitance ? package in 8mm tape on 7? diameter reels. ? compatible with infrared and vapor phase reflow solder process. ? pb free ? the product itself will remain within rohs compliant version. descriptions ? pt67-21b/c14/tr8 is a high speed silicon npn epitaxial planar phototransistor in a compact surface-mountable package. it?s compatible with automatic placement equipment and can withstand ir reflow, vapor phase reflow , and wave solder processes. applications ? miniature switch ? counters and sorter ? position sensor ? infrared applied system device selection guide chip led part no. material lens color pt silicon black
everlight electronics co., ltd. http:\\www.ev erlight.com rev 1 page: 2 of 10 device no dtt-067-248 prepared date 10-27-2006 prepared by jainetsai 1.8 1.6 1.8 collector emitter pt67-21b/c14/tr8 package dimensions notes: 1.all dimensions are in millimeters 2.tolerances unless dimensions 0.1mm absolute maximum ratings (ta=25 ) parameter symbol rating units collector-emitter voltage v ceo 30 v emitter-collector-voltage v eco 5 v collector current i c 20 ma operating temperature t opr -40 ~ +100 storage temperature t stg -40 ~ +100 soldering temperature t sol 260 power dissipation at(or below) 25 free air temperature p c 75 mw notes: *1:soldering time Q 5 seconds.
everlight electronics co., ltd. http:\\www.ev erlight.com rev 1 page: 3 of 10 device no dtt-067-248 prepared date 10-27-2006 prepared by jainetsai pt67-21b/c14/tr8 electro-optical characteristics (ta=25 ) parameter symbol condition min typ max unit rang of spectral bandwidth 0.5 --- 700 --- 1100 nm wavelength of peak sensitivity p --- --- 940 --- nm collector-emitter breakdown voltage bv ceo i c =100 a ee=0mw/cm 2 30 --- --- v emitter-collector breakdown voltage bv eco i e =100 a ee=0mw/cm 2 5 --- --- v collector-emitter saturation voltage v ce(sat) i c =2ma ee=1m w/cm 2 --- --- 0.4 v collector dark current i ceo v ce =20v ee=0mw/cm 2 --- --- 100 na on state collector current i c(on) v ce =5v ee=0.1mw /cm 2 16 --- 80 a rise time t r --- 15 --- fall time t f v ce =5v i c =1ma r l =1000 --- 15 --- s rank condition v ce =5v, ee=0.1mw /cm 2 unit a bin number bin1 bin2 bin3 bin4 min R 16 16 25 40 max ---- 32 50 80
everlight electronics co., ltd. http:\\www.ev erlight.com rev 1 page: 4 of 10 device no dtt-067-248 prepared date 10-27-2006 prepared by jainetsai 0 0.2 0.4 0.6 0.8 1.0 ta=25 600 700 800 900 1000 1100 1200 o c 2 0.01 0.1 110 c 0 50 100 150 200 50 0 20 160 120 100 40 60 0 2 10 70 30 40 60 20 80 140 0 40 80 100 60 -40 25 50 75 0 125 20 100 pt67-21b/c14/tr8 typical electro-optical characteristics curves fig.1collector power dissipation vs. fig.2 spectral sensitivity ambient temperature fig.3 relative collector current vs. fig.4 collector current vs. ambient temperature irradiance
everlight electronics co., ltd. http:\\www.ev erlight.com rev 1 page: 5 of 10 device no dtt-067-248 prepared date 10-27-2006 prepared by jainetsai 10 10 0 10 10 10 25 50 75 100 10 4 0 0 2 1 6 8 2 3 14 12 4 pt67-21b/c14/tr8 typical electro-optical characteristics curves fig.5 collector dark current vs. fig.6 collector current vs. ambient temperature collector-emitter voltage
everlight electronics co., ltd. http:\\www.ev erlight.com rev 1 page: 6 of 10 device no dtt-067-248 prepared date 10-27-2006 prepared by jainetsai pt67-21b/c14/tr8 precautions for use 1. over-current-proof customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package, the leds should be kept at 30 or less and 90%rh or less. 2.3 the leds should be used within a year. 2.4 after opening the package, the leds should be kept at 30 or less and 70%rh or less. 2.5 the leds should be used within 168 hours (7 days) after opening the package. 2.6 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
everlight electronics co., ltd. http:\\www.ev erlight.com rev 1 page: 7 of 10 device no dtt-067-248 prepared date 10-27-2006 prepared by jainetsai pt67-21b/c14/tr8 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be car eful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing.
everlight electronics co., ltd. http:\\www.ev erlight.com rev 1 page: 8 of 10 device no dtt-067-248 prepared date 10-27-2006 prepared by jainetsai pt67-21b/c14/tr8) reliability test item and condition the reliability of products shall be satisfied with items listed below. confidence level 90% ltpd 10% no. item test conditions test hours/ cycles sample sizes failure judgement criteria ac/re 1 reflow temp. 260 5 5secs 6mins 22pcs 0/1 2 temperature cycle h : 100 15mins 5mins l : -40 15mins 50cycles 22pcs 0/1 3 thermal shock h :+100 5mins 10secs l :-10 5mins 50cycles 22pcs 0/1 4 high temperature storage temp. +100 1000hrs 22pcs 0/1 5 low temperature storage temp. -40 1000hrs 22pcs 0/1 6 dc operating life v ce =5v 1000hrs 22pcs 0/1 7 high temperature/ high humidity 85 / 85% r.h 1000hrs 22pcs i c(on) Q l 0.8 l lower specification limit 0/1
everlight electronics co., ltd. http:\\www.ev erlight.com rev 1 page: 9 of 10 device no dtt-067-248 prepared date 10-27-2006 prepared by jainetsai pt67-21b/c14/tr8 package dimensions loaded quantity per reel 2000pcs/reel collector emitter
everlight electronics co., ltd. http:\\www.ev erlight.com rev 1 page: 10 of 10 device no dtt-067-248 prepared date 10-27-2006 prepared by jainetsai rohs pt67-21b/c14/tr8 packing quantity specification 1.2000pcs/1volume 1volume/1bag 2.10boxes/1carton label form specification cpn: customer?s production number p/n : production number qty: packing quantity cat: ranks hue: peak wavelength ref: reference lot no: lot number made in taiwan: production place notes 1. above specification may be changed without notice. everlight will reserve authority on material change for above specification. 2. when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. these specification sheets include material s protected under copyright of everlight corporation. please don?t reproduce or cause a nyone to reproduce them without everlight?s consent. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiw an, r.o.c http:\\www.everlight.com pt67-21b/c14/tr8
|
